海湾标准组织(GSO)对测试报告的新规定自 2024 年 7 月 30 日起生效,在此摘取重点内容再次提醒
1. Maximum Acceptance Period for Test Results: 测试结果的最长接受期限
Test results shall be generally considered valid only if obtained within a period no longer than 3 years prior to the date of the manufacturer’s application for G-Mark certification to the Notified Body.
一般而言,只有在制造商向指定机构申请 G-Mark 认证之日时不超过 3 年的测试结果才被视为有效。
Effective immediately, test results utilized for Gulf Type Examination certification will be considered valid if obtained within a period not exceeding three years from the date of actual test performance. This period is determined from the date when testing activities were completed and issued the test report, as explicitly stated in the laboratory testing report.
从即日起,用于海湾地区型式认证的测试结果,如果是在自实际测试之日起不超过三年的时间内获得的,则视为有效。该期限从实验室 测试报告中明确说明的测试完成并出具测试报告之日算起。
2. Traceability of the test reports to the products applied for certification: 测试报告与申请认证产品的可追溯性
Test reports shall explicitly reference the manufacturer, brand, and model of the products applied to be certified for G-Mark.
测试报告应明确列出申请 G-Mark 的制造商、品牌和型号。
The manufacturing location (factory), if indicated in the test report, shall match the information provided in the application for certification.
生产地点(工厂),如在测试报告中标明,应与认证申请中的信息一致。
The test reports shall include sufficient photo documentation of the tested products to permit the Notified Body to identify the applied product (model), in particular in case of family models or product series.
测试报告应包含足够的测试产品照片资料,以便指定机构识别申请认证的产品 (型号),特别是家族型号或系列型号。
3.Product Identity Declaration (PID) 产品标识声明
In cases where the test report does not directly correspond to the product model applied for certification, a Product Identity Declaration (PID) or Declaration of Identity (DOI) shall be provided showing the correlation, similarities and differences between the products applied for certification and the tested products and include the references to all test reports that show the relevant test results.
如果测试报告与申请的产品型号不一致,则应提供产品标识声明 (PID 或 DOI),说明申请认证的产品与测试产品之间的相关性、相似性和差异,包括相关测试结果的所有测试报告的参考引用。
The PID/DOI shall be signed by an authorized person on behalf of the manufacturer or his authorized representative (e.g. technical responsible or top management representative) and issued on an official letter showing the name and address of the issuing company.
PID/DOI 应由代表制造商的授权人或其授权代表(如技术负责人或高层管理代表)在显示公司名称和地址的正式信函上签署。